Toyota Supra JZA80

Engine

  1. Replace timing belt
    (2JZ-GE: See page EM-17 )
    (2JZ-GTE: See page EM-19 )
  2. Inspect drive belt (See page CH-2 )
  3. Replace spark plugs
    (2JZ-GE: See page IG-1 )
    (2JZ-GTE: See page IG-1 )
  4. Inspect air filter
    1. Remove the air filter.
    2. Visually check that the air filter is not excessively damaged or oily.
    If necessary, replace the air filter.
    1. Clean the filter with compressed air.
      First blow from the inside thoroughly, then blow off the outside of the filter.
    2. Reinstall the air filter and air cleaner case.
  5. Replace air filter
    Replace the air filter with a new one.
  6. Replace engine oil and oil filter (See page LU-4 )
  7. Replace engine coolant (See page CO-2 )
  8. Inspect charcoal canister
    (2JZ-GE: See page EC-5 )
    (2JZ-GTE: See page EC-5 )
  9. Replace gasket in fuel tank cap
    (2JZ-GE: See page EC-5 )
    (2JZ-GTE: See page EC-5 )
  10. Inspect fuel lines and connections
    (2JZ-GE: See page SF-32 )
    (2JZ-GTE: See page SF-34 )
  11. Inspect exhaust pipes and mountings
    Visually check the pipes, hangers and connections for severe corrosion, leaks or damages.
  12. Adjust valve clearance
    (2JZ-GE: See page EM-4 )
    (2JZ-GTE: See page EM-4 )
This guide is based on the book edition Toyota (RM502U, 1997)
Volksbibliothek, info@volksbibliothek.com

Back